Categories
3D modeling 3d printing

Make a Photography Light Box of cheap material (part 1: design and 3d print).

DIY frame for a Photography Light Box. I designed a 3d printed three way connector to assemble the curtain rods for the box.

Introduction

My wife has a lot of stuff she wants to sell online and asked me to create a sturdy but cheap Photography Light Box. The dimensions of the different objects vary, so I wanted to be flexible with the dimensions of the light box. We came up with a simple idea to create a three way connector that connects curtain rods. The frame will be covered with white bed sheet cloth kept together with velcro. At the local hardware store I found plastified steel curtain rods. These were the cheapest I could find but are still very strong.

Creating the three way connector

I used OpenSCAD to create the three way connector and a 3D model of the light box frame. OpenSCAD is an excellent (and free) program for these symmetrical shapes. Creating the connector in OpenSCAD is therefore easy as can be seen in the timelapse video below. Creating a good 3D printed model is more difficult. The connector that I originally designed had overhang problems while 3D printing and several changes had to be made to compensate for this. Also I needed a connector that fitted firmly on the rod but could also be diassembled with ease. I therefore experimented with the connector by adding or removing part of the cylindrical shape of the connector.

First I added a very small cylinder on either side of each larger cylinder. If the side cylinders are small enough the connector still fits into the rod but some force is needed to pull it out again. Another variant is a somewhat larger cylinder with on each side a smaller cylinder cut out (see image). Both solutions work fine I’ll settle for the cut out cylinder since it looks nicer :D.

Next I’ll print all connectors, cut the curtain rods to the desired size and assemble the frame. I’ll leave it to my wife to finish the Photography Light Box with velcro and diffuser fabric. Want to 3D-print this yourself? All files for this project can be downloaded here.

connector_cura_shot
Two cadidate connectors that hopefully give a better fit into the rod. The connector in the front has is somewhat larger radius of the cylinder but two smaller cylinders are cut out. The connector in the back has a very small cylinder on either side of the larger cylinder.
p1030087
Five iteration of the three way connector with the two latest in the front

Leave a Reply

Your email address will not be published. Required fields are marked *

Discover more from HomeHack

Subscribe now to keep reading and get access to the full archive.

Continue reading